SAML Switch 2 Glass Sale 20-25% Off! Switch² Build Your Own Bundle | Start Building Now! →

Wym Designs Piston Joystick for Switch GO

(1 customer review)

$69.00

Switch GO combo price. Applied in cart.

In Stock. Ships Fast.
Just Landed Shipping Now! Many colorways to choose from!
5.0 / 5
1 review
Read reviews

WYM DESIGNS | PISTON JOYSTICK | DR. DABBER SWITCH GO

A directional joystick carb cap for the Dr. Dabber Switch GO, machined from solid Grade 5 titanium by Kyle Wym in a one-person USA shop. The Piston controls how much air reaches the bucket, so your concentrate comes off denser and holds its terps at low temp. Pick it up and it feels like what it is: a precision part cut one at a time, anodized in colors that live in the metal. We stock it in the Wym standard .094 bore, a tighter .090, and a short run of more open bores for heavier glass.

Grade 5 Ti
Solid Bar Stock

.090 to .155
4 Bores In Stock

25+ Colorways
Anodized and Two-Tone

Switch GO
Fitment

Tune the Draw to Your Glass
The stock .094 bore builds back-pressure for dense, flavor-first pulls, and the .090 goes a step tighter. The open .110 and .155 bores breathe easier, which is exactly what a JFGlass diffy pump or a recycler wants on a compact rig.

Fine Machining You Can Feel
Crisp edges, clean bores, and real weight in the hand. Every Piston is turned from titanium bar, hand-deburred, and anodized, so the color is part of the metal instead of paint sitting on top of it.

Pick your restriction first, then your color. Photos and video show this Switch GO Piston. The Switch 2 version is listed separately and looks nearly identical, with minor changes for its larger grommet. Colors are hand-sorted and many pieces carry more than one tone, so if you want a specific combination, ask and we will send photos or video of the exact piece.

Ships Thursday
Ships from Southwestern Michigan, typically 2 to 4 days to most of the US via UPS Ground.
All Major Cards Accepted with a Guaranteed Safe Checkout

Wym Designs | Titanium Joystick for Switch GO

The Piston

A directional joystick carb cap for the Dr. Dabber Switch GO, machined from solid Grade 5 titanium in a one-person American shop. Choose your bore, choose your color, and give your compact rig a big-rig draw.

Grade 5 Ti
Solid Stock

4 Bores
.090 to .155

375-475°F
Tuned Range

USA
Cut One at a Time

Meet the Maker

One Lathe, One Pair of Hands

Kyle Wym is an engineer and machinist who got tired of stock carb caps leaking flavor, so he started cutting his own. Every Piston that leaves his shop was bored, faced, deburred, and checked by the same person who designed it. Nothing is jobbed out. It is a small operation on purpose: slower, tighter tolerances, and a finish closer to a watch case than a vape part.

Ordering direct means a made-to-order wait while Kyle cuts your piece. We keep them in hand, sorted by bore and color, so yours ships with the rest of your gear. Same maker, same metal, no queue.

The Physics

Why a Controlled Bore Tastes Better

The idea is simple and the machining is what makes it work. Three steps from stock cap to flavor cap.

01
Set the Inlet
A stock cap lets air rush straight through the bucket. The Piston meters it through a single bore machined to a measured diameter. That number is the whole trick, and it matters even more on a compact device like the GO, where a wide-open draw rushes the vapor before it develops.

02
Build Back-Pressure
A metered inlet builds back-pressure across the bucket. Concentrate stays on the heat a beat longer and vaporizes more completely instead of getting pulled off half-spent by a wide-open airpath.

03
Hold the Low Temp
Denser vapor at lower temperature is the payoff. The Piston is tuned for the 375 to 475 degree range where terps survive. You taste the strain instead of the scorch, and the joystick tip steers the airflow to sweep the bucket clean.

Pick Your Restriction

Four Bores, One Question

The restriction is the bore diameter in inches. Smaller number, tighter draw and more back-pressure. Bigger number, easier pull and more airflow. The real question is how much drag your glass already adds, because the cap and the glass add up.

.090
Tight: Flavor Over Everything
A step tighter than stock. The most back-pressure we carry for the GO and the slowest, densest pull. Best on a dry top or light bubbler when flavor is the only thing you care about. Limited quantities.

.094
Stock: The Wym Standard
The bore Kyle cuts for the Switch GO by default and the deepest stock we carry. Dense low-temp flavor with a draw that still feels natural on most GO glass.

.110 / .155
Open: Built for Heavy Glass
More open bores for glass that already adds drag. A diffy pump or a recycler moves more water than a dry top, and an open cap keeps the pull smooth. The .155 is the most open we stock, and there is only one.

Glass Pairings

Match the Cap to the Glass

The Piston pairs well with most Switch GO glass. These are the combos we reach for ourselves.

Open Bores
JFGlass Diffusion Pumps
The GO diffy pump is built for slow, chuggy, low-temp sessions. Put a .110 Piston on top and the pull stays smooth while the diffusion does its job.

Stock and Tight Bores
Dry Tops and Light Glass
When the glass adds little drag of its own, the .094 or .090 gives you the full back-pressure effect. This is where the Piston tastes its best.

The Build

Built Like an Instrument

Titanium, tolerances, and a finish that shows its work. This is what separates a machined cap from a cast one, and why it is as nice to hold as it is to use.

Grade 5 Titanium
Solid bar stock, not coated pot metal. Grade 5 shrugs off heat cycle after heat cycle, puts no taste of its own into the vapor, and will outlast the rig it sits on.

Color in the Metal
Colored Pistons are anodized, an electrochemical finish that lives in the titanium itself. Two-tone pieces pair a color with bare raw titanium for contrast. Nothing painted, nothing to flake into your airpath.

Directional Joystick
The joystick tip pivots to aim the airstream anywhere in the bucket. Steer the puddle, chase the last bit into the corner, and finish the dab clean instead of leaving a burnt ring for the swab.

Straight Talk

Know Before You Buy

Heads Up
Photos Show the Switch GO Piston
Our product photos and video show the Switch GO Piston, the one you are buying here. The Switch 2 version looks nearly identical, with minor changes to fit its larger grommet, so both listings share the same photos.
Heads Up
Colors Are Hand-Sorted
Anodized titanium does not always land on one tidy color name. Many pieces carry more than one tone, and some of those extra tones may not be in the name. We did our best to categorize and label every piece accurately, but like anything there may be small discrepancies. If you are after a very specific combination, our photos or video may not capture it perfectly. Reach out and we will send follow-up photos or video of the exact piece before you decide.
Heads Up
Switch GO Only
This listing is cut for the Dr. Dabber Switch GO. It will not fit the Switch 2, which takes a larger cap. The Switch 2 version of the Piston has its own listing.

Heads Up
Most Combos Are One of One
One person cuts every piece, so stock arrives in small drops. Most color and bore combos are a single piece, and the open bores are the scarcest of all. If you see the one you want, grab it.

Heads Up
Aftermarket by Design
Wym Designs is an independent maker. This cap is not made, endorsed, or sold by Dr. Dabber. The device name is listed for fitment only.

Heads Up
Titanium Care Is Easy
A warm iso soak and a wipe brings it back to clean. Skip the torch. Direct flame will shift anodized colors over time. The metal itself is nearly indestructible in normal use.

Included

What’s In the Box

Support & Community

Not Sure Which Bore?

Wym Designs | Veteran-Owned | Real Support
Ready to cap it right?

Pick your bore and color above. Tell us what glass you run and we will point you at the right restriction. We run these caps on our own rigs.

Veteran-Owned and Operated. Small American makers back small American shops. Wym Designs earned this shelf the hands-on way.

Restriction

.090 (Tight), .094 (Stock), .110 (Open), .155 (Extra Open)

Color

Blue with Raw Ti, Raw Ti, Rainbow Multicolor, Yellow Gold, Magenta, Emerald Green, Emerald Green with Raw Ti, Purple & Turquoise with Raw Ti, Yellow Gold with Raw Ti, Rainbow Swirl Multicolor with Raw Ti, Rainbow with Raw Ti, Lime Green, Lime Green with Raw Ti, Purple, Purple with Raw Ti, Purple Magenta with Raw Ti, Two-Tone Purple (Light & Dark), Deep Blue Purple with Raw Ti, Blue, Magenta / Dark Pink, Magenta with Raw Ti, Turquoise, Purple, Blue, Magenta, Turquoise, Pink & Rose Gold, Pink with Raw Ti, Turquoise with Raw Ti

5.0 / 5
1 review

1 review for Wym Designs Piston Joystick for Switch GO

  1. O. (verified owner) –

    Verified Buyer

    someone recommended this model on reddit so i picked one up and i have no complaints. tons more vapor, high quality build… overall very satisfied!!

Add a review

Your email address will not be published. Required fields are marked *

Drag photos here or click to upload

You may also like…

We ship to the United States only. No international orders, including Canada, the UK, and the EU. Shipping policy