TUG XL

**No Longer Stocking Device. We will continue to maintain inventory of parts for repairs and spares

***Base Only is barebones erig base with no spare parts. We will include a power cord and dab tool.***

***The last remaining TUG XL unit is not a bundle. It does include all original parts as the TUG 2.0 units on the market, except with the XL cups as we sold standard***

Why Choose the TUG XL Over Previous Models?

The TUG XL is a leap forward in performance and design, featuring significant upgrades that deliver more power, flavor, and functionality. Here’s how it stands out:

• 3D XL Heater: The TUG XL is equipped with a larger 3D XL ceramic heater, replacing the smaller heaters found in previous models. This upgrade produces more vapor, enhances flavor extraction, and offers increased power, making every session more efficient and satisfying.
• Refined Heat Settings: Designed specifically for the TUG XL heater, the four unique heat settings provide precise control for achieving perfect low-temp dabs with consistent performance. Whether you prefer flavor-rich hits or potent clouds, the TUG XL delivers across the board.
• All-Glass Airpath and Bubbler: Unlike earlier versions, the TUG XL introduces an all-glass airpath for smoother, cleaner vapor. Paired with the upgraded bubbler, this design enhances airflow and is fully compatible with other devices, such as our Pocket Rocket, offering even more versatility.

With these enhancements, the TUG XL is the ultimate device for dabbers seeking premium performance and reliable design in a compact package. Upgrade your experience and feel the difference!

Features

• One button functionality for ease of use
• 3D XL Heated high polish ceramic vaping surface
• Replaceable atomizer and self-cleaning with separate purchase of Pico 25 Mod and Cub base
• Vortex Airflow – Aluminum spinner carb cap with carb cap tether
• Borosilicate Glass Bubbler
• Four carefully tuned heat settings
• All-Glass Vapor Pathway
• Low maintenance
• Approx. 1 hour 45 minute charging time
• 2700mah Li-Ion Battery Pack
• Approx. 16 full sessions – mixed power settings
• Under-Lit Bubbler LED

Setup

• Always hold your e-rig upright! If you angle it during use concentrate will spill out the bucket! Now that’s out the way…
• Charge your base using the provided wall plug and cable.
• Fill the bubbler from the top, when it is removed from the base. Ensure any excess liquid has been wiped away.
• Do not fill the bubbler past the bottom third.
• Place bubbler onto TUG Base then gently and firmly push it straight down into place so that the sucker seals onto the bottom.
• Select your desired heat setting (start low if you’re not sure).
• Now that’s all done we get onto the vaping methods as there are different ways the TUG E-rig can be used.

Vaping methods

Cold Starts – This method is best for getting the most flavor and material preservation as you start inhaling as soon as vapor is being produced. Vaping in this way will cause the session temperatures to be slightly lower than otherwise because the air passing around the heater will decrease heating speed.  You can start your inhale at any point, we suggest keeping an eye on the button flashes so that you can always begin inhaling after a set number of flashes, if desired, providing a very consistent and repeatable experience.

• Load a rice grain size dab into the heater
• Press the fire button twice to activate session mode
• When your concentrate starts to bubble begin inhaling gently with the carb cap left off
• When the TUG base vibrates place the carb cap back on and continue your inhale as you normally would
• For subsequent inhalations just inhale as desired, when the flavor leaves your material, the vapor becomes harsh or stops being produces press the fire button once more to cancel the session
• If you still have material left inside at the end of the session simple hit the fire button twice again and start vaping immediately, no need to wait for the vibrate as your heater will already be close to vaping temperature. The second session will always run a little hotter than the first if it is started straight after

Hot Starts – Vaping in this way allows the heater to reach full temperature for any given setting; so this method is best for getting the maximum vapor production and effects as quickly as possible.

• Press the power button twice to activate session mode
• Load your dab onto your dab tool – basmati rice size again
• Wait for the TUG base to vibrate indicating the session temperature has been reached
• While inhaling gently load the dab into the heater, then replace the carb cap and inhale as your normally would
• For subsequent inhales you can carry on as desired. The same applies here with regard to finishing your session. If your material is finished hit the fire button once to cancel the session early, if you still have material left simply hit it twice when the session has ended to start it again!
• As with cold starts, follow up sessions will always run a little hotter.

Manual Heating – Self explanatory, load a small rice size dab into the heater and hold down the power button. Inhale as desired.

Manual hold can also be used instead of double pressing to finish a session or to heat the heater for easier cleaning.

Button Functions

• Hold – Manual fire up to 60 seconds
• Two clicks – Activate session mode – Two clicks to cancel
• Three Clicks – Change heat setting – Blue/Green/White/Red from Low to High
• Four Click – Display power level – Red/Low – White/Medium – Green/Full
• Five Clicks – Off/On

Sessions temperatures

The total session time for the is 80 seconds, this includes the pre-heat time. When the temperature has been reached and pre-heat is finished the TUG will vibrate. Each heating profile has been set up with a multi-stage voltage profile set up to maintain a fairly stable temperature during use. The longer you wait to inhale, the higher the temperature will be so we suggest starting with the vibrate and taking it from there! This is useful information as it’s possible to get higher temps than are listed below by simply waiting for a few seconds after the pre-heat vibrate!

• Blue –  Approx. 410-428F
• Green – Approx. 428-446F
• White – Approx. 464-482F
• Red – Approx. 500-518F

Cleaning

• Wipe out heater with a q-tip after each use
• Clean the area around the RDA heater weekly to stop residue building up
• Replace bubbler water daily
• To clean bubbler fill with hot water and shake to remove large residues. Soak in ISO to fully clean. Rinse thoroughly with warm water after soaking.

Included

• TUG Base
• TUG 3D XL Heated Chamber
• Glass Bubbler
• Vortex Carb Cap (Anodized Aluminium)
• Dab Tool (Stainless Steel)
• USB Cable
• 5 x Cotton Swab/Q-tips
• 2 x Alcohol Pad/Wipe

Certifications

• CE Certified
• ROHS Certified Materials
• FDA Approved Silicone
• UN 38.3 Certified Li-Ion Battery Pack.

Safety Features 

• Over-charge
• Over-discharge/Low battery
• Over-heat
• Low heater resistance
• Short-circuit
• No atomizer

Warning Lights – When your TUG base flashes three times it’s trying to tell you something…

• Blue – Short-circuit warning
• Green – No atomizer warning
• White – Over-heat warning
• Red – Low battery warning

Warranty information

• For all warranty claims please contact the store you purchased from.
• The TUG power base is covered by a one year manufacturer warranty against defects.
• The atomizer is covered by a one week manufacturer warranty against defects.
• While atomizers are expected to last much longer than one week, they can be damaged by mishandling and misuse. We understand that not everyone will use the device daily or immediately so offer a one week warranty, from the date of delivery, to report any issue with your atomizer.

Disclaimer

SZ Crossing or its retailers are not responsible for, and accepts no liability for, the use or misuse of this product by the customer. All SZ Crossing products are designed and sold for adult use and for legal purposes only. It is the end user’s responsibility to be aware local laws and regulations and adhere to them.