Switch Swabs
Double-ended bamboo swabs sized for the Switch 2 and larger chamber devices.
Built Different
Every dimension of Switch Swabs was chosen with large chamber devices in mind. Here is what you are working with.
|
01
Bamboo Stem
The stem is 6 inches long and made from natural bamboo. It flexes slightly under pressure without cracking, which matters when you are rotating inside a glass atomizer. Firm enough to control, forgiving enough not to snap. No synthetic materials near your chamber.
|
02
Wide Tip
The wide end is 35mm (1.4in) long and 5mm thick with densely packed shed-free cotton. It covers the full floor of the Switch 2 glass atomizer in one pass and picks up reclaim from the walls with a few rotations. Nothing falls apart or pills mid-clean.
|
03
Short Tip
The short end is 16.5mm (0.65in) long at 5mm thick on the Standard variant. The Pointed Tip variant replaces this with a 13.8mm tapered cotton point for reaching into crevices, around spinner beads, and inside carb cap channels. Not sure which you need? The Mix pack gives you 100 of each in a single 200-count order.
|
Why It Works
|
Reclaim Absorbency
The cotton density pulls reclaim out of the chamber rather than pushing it into the seams. One or two passes on a warm atomizer and you are done. No smearing, no spreading the mess around.
|
Zero Fiber Shed
Standard cotton swabs leave fuzz. Switch Swabs do not. Shed-free cotton stays intact from first touch to last pass so you are not picking white fibers out of your atomizer or off your coil before the next dab.
|
Double-Sided Value
Every swab gives you two usable ends. Lighter dabs often only need one side, which means a single swab goes further than you expect. It adds up across a pack and makes these one of the better value accessories you can stock up on.
|
What They Fit
Switch Swabs were designed with the Switch 2 as the primary target. They also work well with any device that has a larger atomizer or wider chamber opening.
|
Primary Device
Dr. Dabber Switch 2
The 35mm wide tip was sized around the Switch 2 glass atomizer. It covers the full floor in one pass and wraps the walls in a few quick rotations. The 6-inch stem keeps your hand out of the way of residual heat while you work. Both tip variants are compatible with the Switch 2.
|
Also Works With
Bangers, Slurpers, and Large eRigs
Any banger over 20mm, a slurper tube, or a large chamber eRig with a wide atomizer works well with Switch Swabs. If your current swabs feel undersized or leave residue behind because the tip does not reach the bottom, these are the upgrade. Also great for cleaning carb caps with the Pointed Tip variant.
|
Know Before You Buy
|
Heads Up
Designed for Larger Atomizers
Switch Swabs are built for large chamber devices. The 35mm wide tip will not fit comfortably in narrow-neck atomizers or standard-size quartz bangers under 20mm. If your device has a smaller atomizer, a standard q-tip is the right tool for the job.
|
Heads Up
Pointed Tip is One End Only
Choosing the Pointed Tip variant gives you a tapered short end for reaching crevices and carb cap channels. The wide end is still 35mm flat cotton. The Pointed Tip is not a second wide tip. If maximum flat surface coverage on both ends is what you need, choose the Standard variant.
|
What’s in the Box
|
+
200 Switch Swabs per pack |
+
Your choice: Standard, Pointed Tip, or Mix |
|
+
Mix packs: 100 Standard + 100 Pointed Tip |
+
Shed-free cotton on every swab, both ends |
Need Help?
|
Dab Hut Discord Community tips, live support |
Contact Us Email or on-site chat. We respond same day. |
Dab Resources Guides, tips, and education |
Switch Swabs are a daily-use accessory that goes fast. Grab a pack above, or hit us on Discord or the contact page with any questions before you order.
Veteran-Owned and Operated. The Dab Hut is built by a U.S. Army veteran who dabs. Every product we carry or design ourselves is something we actually use.





















Reviews
There are no reviews yet.