Super Windy Cart Moodmat
A full racing roster redrawn as vape carts, hand illustrated across an 11 by 8 inch recycled rubber mat. Art by Ethan Windy, signed on the back.
The Print
Every Racer Is a Cart Now
The joke lands immediately and then keeps paying off. Every driver on this sheet has been turned into a cartridge: a rounded tank with a mouthpiece stem on top, banded and dotted in that character’s colors. Then the same cartridge is drawn again lying on its side with the mouthpiece bent up at the front like a nose cone, wheels under it, and the driver sitting in the middle of it. Four rows, two racers per row, eight in total.
The cast is drawn faithfully enough that you will name every one of them yourself. A mustached man in a red cap and a taller one in green. A figure whose whole head is a spotted mushroom cap. A crowned blonde in pink with a very unimpressed expression. A mustached man in yellow. A green dinosaur. A horned reptile with red hair and a spiked shell. A big ape at the bottom right. Each one gets a portrait bust beside their vehicle, and the portraits are where the hand drawing is most obvious and most charming.
The whole thing is printed on a cream panel with the black rubber left as a border around it, which is unusual for this material and makes the mat read like a page torn out of a notebook rather than a poster. Line work is marker, color is laid in loosely, and nothing is perfectly square to anything else. There is no UV on this one and it does not need any.
Designed By
Ethan Windy
The back is printed SUPER WINDY CART inside a checkered flag banner, with a small secondary mark below it, a hand scrawled signature, ETHAN WINDY hand lettered underneath, then an x and the moodmats logo. The title on this listing is his, printed on the piece, not something we came up with.
Made in New Jersey Since 2009
Rubber That Already Had a First Life
Moodmats started with scraps from old wetsuits and discarded scuba and surf neoprene, material that was headed straight for a landfill. That became Lava Rubber, and Lava Rubber is what every Moodmat is cut from. The feedstock now comes from wetsuits, gaskets, weatherstripping, seat molds, and other clean scrap that gets collected or donated. More than two tons of it moves through the New Jersey shop every month, gets pressed into sheet stock, then die-cut and screen printed. Keeping that material out of the ground has been the point from day one.
Closed-Cell Neoprene
Closed-cell rubber does not drink up what you spill on it. Water, reclaim, and terp splash sit on the surface instead of soaking in, so a wipe with soapy water puts it back to new.
It Stays Put
The rubber grips whatever it is sitting on and grips whatever you set on top. A rig that would skate across a glass table or a finished desk stops moving the second it lands on a Moodmat.
Tough and Self-Extinguishing
Heat resistant, self-extinguishing, and built out of material that already survived a first life. This is not a printed coaster that curls after a month on the table.
Where People Actually Put These
It Does Not Have to Hold a Rig
A Moodmat protects a surface and grips what sits on it. Whether that thing is a banger, a camera, or nothing at all is up to you. They are called Moodmats for a reason. Pick the one that matches how you feel and put it wherever it belongs.
Rig and Glass Pad
The job it was built for. Keeps glass off hard surfaces and keeps hard surfaces off your glass.
Display Surface
Figures, models, controllers, dice, cameras, watches. Anything worth setting on something intentional.
Wall Art
Plenty of these never touch a table. Hang it, frame it, or pin it behind the setup and let the print do the work.
Desk and Everyday
Trivet for hot pans, landing spot for keys, pad under a pet bowl, cushion on a camp table.
Why It Matters
Runs End. Prints Do Not Come Back.
Moodmats print in runs, and runs end. Once a design is out, it is out. Artist collabs and drop exclusives regularly land in quantities of ten to twenty five pieces, which is why the people who collect these track drops, trade them, and frame the ones they will never put a rig on. If this specific print matters to you, the time to grab it is while it is still on the shelf.
Signed on the Back, Not Numbered
The back carries the title banner, the artist signature and the moodmats mark, with no numbered box anywhere on it. So there is no count to quote and we are not going to invent one. What we can tell you is that it came out through a live sale rather than the moodmats store page, and that we have one.
No Reprints
Moodmats does not go back and run a sold-out design again. When this one is gone from our shelf and theirs, the only way to get it is from somebody who already has one.
Worth Hanging
A print this limited does not have to earn its keep under a rig. Plenty of these end up on a wall, in a frame, or stacked with the rest of a collection.
The Details
Specs and Care
| Size | 11 by 8 inches, approximate |
| Shape | Rectangle |
| Material | 100% upcycled closed-cell rubber, Lava Rubber stock |
| Screen printed, full color on a cream panel, standard ink | |
| UV | None. Standard ink only |
| Artist | Ethan Windy. Signed on the back |
| Edition | No run number printed |
| Release | Live sale exclusive, not a regular catalog item |
| Origin | Made in New Jersey, USA |
Wipe it down with warm water and a little dish soap, then let it air dry flat. That is the whole routine. Do not run it through a washing machine or a dryer, do not scrub the print with an abrasive pad, and do not rest a lit torch or a glowing-hot banger directly on the surface. Use a stand or a puck for anything still at temperature.
Straight Talk
Know Before You Buy
Upcycled Means Variation
The rubber is reclaimed scrap, so base color, speckle, and surface texture shift slightly from sheet to sheet. Two mats of the same design will not be photocopies of each other. That is how you know it is the real material and not virgin stock.
Heat Resistant, Not Heatproof
The rubber is self-extinguishing and handles warm gear without complaint. It is not a torch pad. Park anything still glowing on a proper stand or a quartz puck, not on the print.
A Light Print Field Shows More
Most Moodmats are dark, so spills and reclaim disappear into them. This one is printed on a cream panel, and a light surface will show a stain that a black mat would hide. It cleans up with warm water and dish soap like any of them, it just asks to be wiped sooner rather than later.
No UV on This One
Standard ink, full color, no reactive application. A blacklight does nothing to it. Several Moodmats in this drop do glow, this print is not one of them, and we would rather say so up front than have you plug in a lamp and wonder.
This Is the Exact Mat You Get
One of these exists at this shop. The photos are of the actual piece in hand, front and back, so what you see is what ships.
Set the Mood
Recycled rubber, made in the USA, printed with art worth looking at. Free shipping on orders over $75, and every order ships from a veteran-owned small business.
Reviews
There are no reviews yet.