Ghost Ship Moodmat
A grinning purple ghost sealed in a bubble helmet with chrome thrusters throwing flame, die cut on nine inches of recycled rubber and outlined in a green ink layer that burns neon mint under a blacklight. Limited run of 100.
The Print
A Grinning Ghost With Thrusters
The main figure is a round purple ghost with stubby limbs, red eyes and a mouth full of pointed teeth stretched into a grin that takes up most of its face. A long red tongue hangs out of one side of it. The whole head is sealed inside a clear bubble helmet, and riding in there with it is a second, smaller purple face with the same red eyes, floating just behind the glass. It is a friendly drawing with a mean smile, and it holds the middle of the mat without any background behind it.
The hardware is where this stops being a straight character piece. Two chrome thrusters are mounted at its back, drawn with ribbed housings and rolled lips, throwing long plumes of orange flame down and out to either side. Around all of it, four smaller gas ball faces drift in purple clouds, each one grinning back at you. The helmet, the thrusters and the flame are the artists’ own additions rather than anything borrowed, and they are what turns a floating figure into something launching. Every element in the piece is traced in a bright green keyline that ties the whole composition together.
Then the lamp goes on. That green keyline is a dedicated UV layer, so under a blacklight the entire outline of every shape ignites neon mint at the same moment, the tongue and both sets of eyes come up hot pink, and the tips of the flame plumes go orange. This is one of the strongest reactive prints we have handled. It is not a subtle accent on one detail, it is the drawing itself lighting up along every edge, and the piece reads as a different image lit than unlit.
Made With
Dark Mountain Cult
Dark Mountain Cult is a collective rather than a single credited illustrator, which is exactly why this listing carries a limited run badge instead of an artist series one. They work in drops, they run a trade, sell and collect community around those drops, and the work that comes out of it tends to look like this one: die cut tight to the character, heavy black and green line, and a reactive ink layer doing real work rather than sitting on one detail.
<!– ===================================================================== SECTION 2b: VIDEO SLOT Leave this div exactly as it is. It is EMPTY on purpose and it is not a token, so the builder passes it through untouched. The TDH Product Video plugin swaps it for the video section at display time when the product has a Vimeo URL on its edit screen, and strips it entirely when it does not. So an empty slot never reaches a customer, and nobody ever hand-edits an embed into a description. Do NOT paste an in here. iframes are not in this site’s KSES whitelist and get stripped on save when pushed through the REST API. ===================================================================== –>
On Video
See It In Hand
Photos only get you so far. This is the actual piece, shot in our hands, so you can see the scale, the finish and how it behaves in real light before you buy it.
Made in New Jersey Since 2009
Rubber That Already Had a First Life
Moodmats started with scraps from old wetsuits and discarded scuba and surf neoprene, material that was headed straight for a landfill. That became Lava Rubber, and Lava Rubber is what every Moodmat is cut from. The feedstock now comes from wetsuits, gaskets, weatherstripping, seat molds, and other clean scrap that gets collected or donated. More than two tons of it moves through the New Jersey shop every month, gets pressed into sheet stock, then die-cut and screen printed. Keeping that material out of the ground has been the point from day one.
Closed-Cell Neoprene
Closed-cell rubber does not drink up what you spill on it. Water, reclaim, and terp splash sit on the surface instead of soaking in, so a wipe with soapy water puts it back to new.
It Stays Put
The rubber grips whatever it is sitting on and grips whatever you set on top. A rig that would skate across a glass table or a finished desk stops moving the second it lands on a Moodmat.
Tough and Self-Extinguishing
Heat resistant, self-extinguishing, and built out of material that already survived a first life. This is not a printed coaster that curls after a month on the table.
Where People Actually Put These
It Does Not Have to Hold a Rig
A Moodmat protects a surface and grips what sits on it. Whether that thing is a banger, a camera, or nothing at all is up to you. They are called Moodmats for a reason. Pick the one that matches how you feel and put it wherever it belongs.
Rig and Glass Pad
The job it was built for. Keeps glass off hard surfaces and keeps hard surfaces off your glass.
Display Surface
Figures, models, controllers, dice, cameras, watches. Anything worth setting on something intentional.
Wall Art
Plenty of these never touch a table. Hang it, frame it, or pin it behind the setup and let the print do the work.
Desk and Everyday
Trivet for hot pans, landing spot for keys, pad under a pet bowl, cushion on a camp table.
Why It Matters
Runs End. Prints Do Not Come Back.
Moodmats print in runs, and runs end. Once a design is out, it is out. Artist collabs and drop exclusives regularly land in quantities of ten to twenty five pieces, which is why the people who collect these track drops, trade them, and frame the ones they will never put a rig on. If this specific print matters to you, the time to grab it is while it is still on the shelf.
One Hundred Made, No Number on the Piece
One hundred is the run our intake sheet carries for this design. There is no hand inked figure anywhere on the print and no back photo to check it against, so the run size is what we quote and a position in it is not something we will invent. Runs at this size do not come back, and the reactive layer is the part that is hard to replace with something else on a shelf. We have two.
No Reprints
Moodmats does not go back and run a sold-out design again. When this one is gone from our shelf and theirs, the only way to get it is from somebody who already has one.
Worth Hanging
A print this limited does not have to earn its keep under a rig. Plenty of these end up on a wall, in a frame, or stacked with the rest of a collection.
The Details
Specs and Care
| Size | 9 inches at the widest point, approximate |
| Shape | Die-cut to the artwork, irregular outline with fine points |
| Material | 100% upcycled closed-cell rubber, Lava Rubber stock |
| Screen printed, full color with a dedicated UV reactive layer | |
| UV coverage | Extensive. The full green keyline, plus tongue, eyes and flame tips |
| Maker | Dark Mountain Cult, a collective rather than one named artist |
| Edition | Run of 100, not individually numbered |
| Origin | Made in New Jersey, USA |
Wipe it down with warm water and a little dish soap, then let it air dry flat. That is the whole routine. Do not run it through a washing machine or a dryer, do not scrub the print with an abrasive pad, and do not rest a lit torch or a glowing-hot banger directly on the surface. Use a stand or a puck for anything still at temperature.
Straight Talk
Know Before You Buy
Upcycled Means Variation
The rubber is reclaimed scrap, so base color, speckle, and surface texture shift slightly from sheet to sheet. Two mats of the same design will not be photocopies of each other. That is how you know it is the real material and not virgin stock.
Heat Resistant, Not Heatproof
The rubber is self-extinguishing and handles warm gear without complaint. It is not a torch pad. Park anything still glowing on a proper stand or a quartz puck, not on the print.
UV Needs a Blacklight
Reactive ink is not glow in the dark. It will not charge up in daylight and shine at you later. It needs a 365nm or 395nm lamp on it, and with one on it this print is as good as this category gets. Without one you still have a clean die cut cartoon with a heavy green keyline.
The Cut Has Delicate Points
The outline follows the artwork, which means there are narrow tips of rubber at the head spikes and at the end of the tongue. They are the thinnest parts of the mat and the parts to be careful with. Do not drag the mat by a point, do not fold it back on itself, and store it flat rather than rolled. Handled normally it is fine, but you should know where the weak spots are before it arrives.
Two Front Photos, No Back Photo
Both images on this page are the front, one in normal light and one under a blacklight, so the glow is documented rather than described. There is no photo of the back, so we make no claim about maker marks or a printed number on this one. The run of 100 comes from our intake sheet.
Set the Mood
Recycled rubber, made in the USA, printed with art worth looking at. Free shipping on orders over $75, and every order ships from a veteran-owned small business.
Reviews
There are no reviews yet.