Free Terp Pearl and Remover Tool with any Switch² Purchase!
Free Shipping Over $75. Switch² Authorized Vendor

Heat Post for Wired One Hit Wonder and Ruby Twist By Crossing Technology

$15.00

Estimated delivery dates: May 18, 2026 - May 26, 2026
In Stock. Ships Fast.
Brand New Product!
No reviews yet Be the first to share your experience
Write a review

CROSSING TECHNOLOGY | BALL VAPE ACCESSORY

A purpose-built dock post for the Wired One Hit Wonder and the Ruby Twist by Crossing Technology. Set your wired ball vape down on a stable, heat-tolerant base instead of dropping it on the table or balancing it against your glass. One post, both vapes, no compromise on safety or aesthetics.

Wired
WOHW Compatible

Ruby
Twist Compatible

Dual
Vape Dock

3rd Party
Base Friendly

One Post, Both Vapes
Dock your Wired WOHW and your Ruby Twist on the same post. Same fitment, same stability, no swapping accessories when you switch between sessions. If you run both vapes, this saves desk space and keeps your station tidy.

Final Production Spec
Final-revision build with a shorter wood base and a reduced O-ring count to clear third-party bases. If you’re running aftermarket bases on your wired setup, this post drops in without modifications. Crossing Tech finalized the dimensions before this run.


Compatibility note: This Heat Post is designed for the Wired One Hit Wonder and Ruby Twist by Crossing Technology only. It does not work with CH (Cannabis Hardware) products. Confirm your wired setup is a Crossing Tech build before ordering.

In stock

All Major Cards Accepted with a Guaranteed Safe Checkout

CROSSING TECHNOLOGY | BALL VAPE ACCESSORY

The Heat Post

A dedicated dock for the Wired One Hit Wonder and the Ruby Twist. Built by Crossing Technology with a shortened wood base and a reduced O-ring count for third-party base compatibility. Holds either vape securely on the same post so you can run them both from one station.

Wired WOHW
Compatible

Ruby Twist
Compatible

Dual Dock
One Post Both Vapes

Final Spec
Production Revision

PURPOSE-BUILT

Why a Dedicated Post

A wired ball vape has to live somewhere when it’s not in your hand. Resting it directly on your desk works until it doesn’t. A purpose-built post solves the problem cleanly: a stable base, the right hole geometry for your specific heater, and a permanent home that respects the heat your setup generates.

01
Heat-Tolerant Resting Spot
Wired ball vapes can run constant heat depending on your session. The post is built to handle that without scorching your desk, your glass mat, or whatever else you would otherwise rest the heater on. Set it down, walk away, come back when you’re ready.

02
Stability That Matters
Wired vapes have cables hanging off them. Without a proper post, gravity and a rogue tug on the cable can pull your heater across the table or off it entirely. The Heat Post anchors the vape vertically with a solid wood base so the cable becomes a non-issue.

03
Designed for Both Vapes
Crossing Tech engineered the fitment to accept both the Wired WOHW and the Ruby Twist on the same post. If you own one and might add the other later, you don’t need a second dock. If you already own both, you can finally consolidate to a single station.

FINAL REVISION

Built for Real Setups

This is the production-ready version of the Heat Post. Crossing Tech revised the design after early testing to better fit how people actually run their wired setups. Here is what changed and why it matters.

SHORTER WOOD BASE
Lower Profile
The final spec has a shorter wood base than the prototypes. The lower profile sits better on a standard dab station and clears any third-party base you might have stacked underneath. If you’ve seen older photos with a taller base, this is not that version.

REDUCED O-RINGS
3rd Party Base Friendly
Fewer O-rings on the post itself, which leaves room for third-party base accessories to seat properly. If you run aftermarket bases on your Wired WOHW or Ruby Twist, the Heat Post drops in without forcing you to remove anything from your existing stack.

UPGRADE READY
Wireless to Wired Path
If you currently run a Wireless One Hit Wonder, the Heat Post is one of the components that lets you convert to the wired version. Wired gives you constant heating off the coil, limitless power for longer sessions, on-demand bowl preheats, and even concurrent banger plus dry herb operation.

PHOTO HEADS-UP
Imagery Lags Behind
Most product imagery in circulation still shows the earlier prototype with the taller wood base and additional O-rings. The unit you receive is the final production spec described above. Photos will catch up over time, the hardware does not need to.

WIRED ADVANTAGES

Why Run Wired

If you’re new to the wired world or considering the conversion, here is what changes when you trade the wireless coil for a wired one. The Heat Post is built for this style of setup specifically.

01
Constant Heating
Wired coils don’t sleep between draws. Set your temperature, leave the post on, and the heater stays at temp indefinitely. No reheats, no waiting, no battery anxiety. Walk up, take a draw, walk away.

02
Limitless Power
Cabled power means no battery ceiling. Run higher wattages for longer sessions without worrying about voltage sag, cell heat, or charge cycles. The wired path is what unlocks the full performance envelope of the WOHW and Ruby Twist heaters.

03
Banger Plus Dry Herb
A wired setup with the right configuration lets you preheat a banger and run dry herb at the same time. Two modes from one heater, no swapping coils between sessions. The kind of flexibility a wireless setup just can’t match.

KNOW BEFORE YOU BUY

Straight Talk

A few real-world notes about this Heat Post so there are no surprises when it arrives.

Important
Does not work with CH products
This Heat Post is designed exclusively for Crossing Technology builds, specifically the Wired One Hit Wonder and the Ruby Twist. It does not fit CH (Cannabis Hardware) ball vape products. Confirm your setup is a Crossing Tech device before ordering. If you are unsure, send us your gear specifics and we will verify before you buy.

Heads Up
Wired vape sold separately
This is the post only. The Heat Post does not include a Wired One Hit Wonder, a Ruby Twist, a coil, a base, or any electronics. If you don’t already own a wired Crossing Tech ball vape, you will need to source the rest of the system to make use of this post.

Heads Up
Production photos may lag
Marketing photos circulating across the wider community may still show the earlier prototype with a taller wood base and more O-rings. The unit shipped to you is the final production revision: shorter base, fewer O-rings, third-party base friendly. The hardware is correct even when the imagery hasn’t caught up.

Heads Up
Wood base is a wear part
Wood handles heat well, but it’s still wood. Long-term constant-heat sessions can leave faint discoloration on the base over time, the same way any wood accessory eventually patinas. This is normal, not a defect, and does not affect function. Treat it like any other wood accessory in your station.

WHAT’S INCLUDED

In the Box

A single Heat Post in the final production spec. Drop it on your station and dock your wired vape.

Wired One Hit Wonder, Ruby Twist, coils, bases, and electronics sold separately. This is a dock post only.

RESOURCES

Questions? We’re Here

Real humans answer every message, usually same day. If you’re not sure whether your wired setup is a Crossing Tech build or a CH build, send us a photo and we’ll verify before you order.

VETERAN-OWNED | REAL SUPPORT | BUILT WITH CROSSING TECH
Anchor Your Wired Setup

The Heat Post is above, ready to add to cart. If you want to talk through your wired build before pulling the trigger, drop us a line or jump into the Discord.


Veteran-Owned and Operated. The Dab Hut helped develop the SS WOHW V2 directly with Crossing Tech. We know this ecosystem inside out and we stand behind the gear we sell.

No reviews yet Be the first to share your experience

Reviews

There are no reviews yet.

Be the first to review “Heat Post for Wired One Hit Wonder and Ruby Twist By Crossing Technology”

Your email address will not be published. Required fields are marked *

Drag photos here or click to upload