The Switch finally goes truly portable. The Switch GO shrinks the Switch experience into a one-hand device in Puffco Peak and Carta territory, small enough to drop in a car cupholder, then makes it faster. A resistively heated titanium well wrapped on its sides and base brings a 14mm quartz insert up to temp quicker than any e-rig we have run, powered by a 7.4V 1600mAh pack. Six dynamic vapor profiles, app control, and a cleaner airpath round it out. This is the single-unit listing. Add-ons sold separately below.
14mm
Quartz Insert
7.4V
1600mAh Li-ion
6
Vapor Profiles
~160mm
Height With Glass
Actually Handheld
This is the Switch shrunk down to one-hand size. It sits in the same class as the Puffco Peak and Carta, far smaller and lighter than the Switch 2. Easy to hold, easy to carry, no JNCO pockets required.
Fastest Heat-Up We Have Run
A 7.4V 1600mAh pack drives a resistive element wrapped around the sides and base of the titanium well for even, omnidirectional heat. Paired with the smaller 14mm insert, it reaches temp faster than any e-rig we have tested.
This listing is the Switch GO single unit. Scroll down for the full breakdown, the six vapor profiles, and the add-ons you can pair with it. Looking to build a kit? See the Switch GO with Add-Ons listing linked below.
Everything that made the Switch a benchmark, rebuilt into a device you can actually hold in one hand and take with you. Resistive titanium heating, a 14mm quartz insert, six dynamic vapor profiles, and the fastest heat-up we have run on any e-rig. The name finally fits.
14mm
Quartz Insert
7.4V
1600mAh Li-ion
6
Vapor Profiles
Cupholder
Fits and Travels
Handheld. Portable. The Switch, Reimagined.
Built to Travel
Finally, a Switch You Actually Carry
The Switch 2 is a fantastic countertop e-rig, but nobody called it portable with a straight face. The Switch GO changes that. It is a handheld now, sized right alongside the Puffco Peak and Pro and the Carta 2 and Sport, and a long way down from the footprint of the Switch 2. It weighs less, holds easier, and goes in a bag without taking it over.
Footprint
Handheld, Not Countertop
Roughly 139mm tall without glass and about 160mm with it, on an 83mm by 42mm base that is only about 46mm thick. That is a true one-hand device, in the same size class as the Peak and the Carta, not a shrunk-down tabletop unit.
Lighter in the Hand
Less Weight, Same Backbone
The GO drops real weight compared to the Switch 2 while keeping the titanium heating core and app control intact. You feel the difference the moment you pick it up, and even more after a long session.
Yes, It Fits in a Cupholder
The roughly 42mm base slips right into a standard car cupholder, the real-world litmus test for a portable e-rig. Riding shotgun or out on a long trip, it rides along without a bag or a stand. That is something the Switch 2 simply cannot do.
How It Heats
Resistive Titanium, Wrapped for Even Heat
The Switch 2 uses induction to heat a 20mm well. The GO takes a different path. A resistive heating element is wrapped around the sides and base of the titanium well, heating it omnidirectionally for clean, even transfer into a 14mm quartz insert. A PT1000 sensor handles temperature accuracy. Smaller thermal mass plus a 7.4V pack is the recipe behind the heat-up speed.
7.4V Fast Heat-Up
A 1600mAh Li-ion pack delivers 7.4V to the heating element. Combined with the smaller 14mm insert and lower thermal mass, the GO reaches temperature faster than any other e-rig we have run. Less waiting, more dabbing.
PT1000 Temperature Control
A PT1000 sensor reads the well so the device holds your target with real accuracy across the whole cycle. That precision is what makes the dynamic vapor profiles repeatable instead of guesswork.
Titanium Well, Quartz Insert
Heat moves from the titanium well into a 14mm quartz insert that touches your concentrate. Quartz keeps the airpath clean and the flavor honest. Step up to the sapphire insert when it lands for even better heat retention.
Six Ways to Dab
Dynamic Vapor Profiles
The GO runs the same Vapor Profile system as the updated Switch 2. Each of the five button presets carries its own temperature, hold time, and dynamic heating mode, and you can build them out in the Dr. Dabber app. Six heating modes give you a curve for every material and every mood.
Descent
Starts hot and steps down through the dab. The factory default and a reliable all-rounder for vapor up front, smooth finish at the end.
Steady
Holds one temperature start to finish. Set it and forget it, the most predictable way to dial in a single material.
Ascent
Climbs gradually from a cooler start. Cold-start style sessions and hash tend to shine here as the temperature builds.
Hill
Rises to a peak for vapor production in the middle of the cycle, then eases down for a smooth, flavorful finish.
Valley
Dips gently at the start to protect terpenes, then rises to finish with solid vapor. Built for high-terpene extracts and solventless.
Custom
Draw your own heating curve in the app, point by point. Save it to any profile and share it with a code. Your device, your rules.
Preset Temperatures
Five Presets, Color Coded
Cycle the five button presets with the plus and minus buttons. The LED band tells you which one you are on at a glance. These are the factory temperatures, all set to Descent out of the box, and every one is fully adjustable in the app.
Setting
Temp
LED
Mode
Setting 1
400°F
Purple
Descent
Setting 2
440°F
Blue
Descent
Setting 3 (default)
480°F
Cyan
Descent
Setting 4
500°F
Orange
Descent
Setting 5
540°F
White
Descent
Dr. Dabber recommends Setting 3 at 480°F as the everyday starting point. For high-terpene extracts and solventless, drop to 440°F or 480°F in Descent or Valley. For full extraction on shatter or wax, 500°F in Steady or Hill is the common daily driver.
Switch 2 Owners, Read This
The Pain Points, Fixed
If you have run a Switch 2, you know its quirks. The GO addresses the ones people actually complained about. This is not just a smaller Switch 2, it is a rethink of the parts that annoyed people.
01
Crown Off Without Pulling Glass
On the GO, the glass seats partially at the back, so you pull the crown straight up to reach the titanium chamber and insert without removing the glass first. Cleaning and reloading get a lot less fiddly.
02
USB-C Up Front
The charging port moved to the front, right by the three battery-level LEDs, so you can see your charge and plug in without flipping the device around. It charges over USB-C Power Delivery 3.0.
03
Reclaim Stays Out Front
Most reclaim collects in the silicone air-inlet buffer area where you can swab it off and keep going. It generally does not get behind the insert, which is a real quality-of-life fix over the old layout.
In the App
Full Control From Your Phone
The Dr. Dabber app links to your drdabber.com account and unlocks the GO completely. Tune every profile, design custom curves, run analytics, and keep the firmware current.
Profiles and Custom Curves
Set temperature, hold time, and heating mode per profile. Draw a custom curve point by point, then share any profile with a code that is good for 30 days.
Light Modes and Stealth
Theme the LED band with looks like Cali Sunset, Purple Haze, Northern Lights, Vegas Nights, and Blue Dream, or slide brightness all the way down for stealth mode when you want it discreet.
Analytics, Haptics, Cleaning Assist
Track how you use the device, toggle haptic feedback, set auto shut-off, and run the cleaning assist cycle that gently warms the insert so it lifts out easily when it is time for a deep clean.
Make It Yours
Pair It With Add-Ons
This listing is the Switch GO single unit and its in-box essentials. If you want to build it out, our companion listing lets you add individual upgrades to your order. Popular pairings include the sapphire insert for better heat retention, terp pearls, custom glass, and the right tools to keep things clean.
Sapphire Insert Quartz Insert Terp Pearls (3 to 6mm) Switch Swabs Custom Glass Carb Cap Upgrades Drop Dab and Claw Tools Mini Heated Dab Tool Drying Fan Tactical Bag
Some of the most-requested items, like the sapphire insert and custom glass bubblers, arrive a little after launch. When they do, you can backorder them and have them ship separately with our $7 split shipping on orders that otherwise qualify for free shipping. Recyclers, dry tops, and more custom glass are in the pipeline heading into July.
The GO uses a 14mm insert, not the 20mm from the Switch 2, and the glass, carb caps, and inserts are sized for this device. Your Switch 2 accessories will not fit. The upside is a fresh set of options built around the GO and its different glass orientation.
Heads Up
Battery Life Tracks Your Timer
On the preset 30 second timers you can clear 20 plus dabs on a charge. Run a long 59 second timer like some Switch 2 users do and that drops to roughly 10 to 15. Most dabs are done well before 30 seconds, so the short timer is the sweet spot for both experience and battery.
Heads Up
Inserts Are Fragile and Get Hot
Never remove the insert while it is hot, and never grab it by the vent holes. Let the device cool, or use the app cleaning assist cycle to warm it gently for easy removal. Day to day, a dry swab after each cycle is all it needs.
Heads Up
Mind the Finish and the Heat
Skip isopropyl on the outer Blue Onyx shell, a damp cloth with a little dish soap is the move. After three or more back to back cycles the area near the chamber warms up, so give it about 20 minutes to cool on heavy sessions.
Included
What’s In the Box
The single-unit package covers everything you need to start dabbing. Add-ons and upgrades are available through the companion listing above.
Switch GO Device
The handheld unit
Glass Attachment
Water filtration
14mm Quartz Insert
Clean airpath
Magnetic Carb Cap
Easy on and off
+ Switch GO Device with Glass Attachment
+ 14mm Quartz Insert
+ Magnetic Carb Cap
+ USB-C Charging Cable
+ Loading / Dab Tool
+ Quick Start Guide and Manual
Resources
Questions Before You Buy?
We run this device ourselves and we are happy to help you dial it in. Drop into the Discord or reach us directly. We answer the same day.
Clean airpath, precise temperature control, and the fastest heat-up we have run, in a device you can finally take with you. The Switch GO earns its name. Whatever you want to know before you order, we are around.
Veteran-Owned and Operated. We carry Dr. Dabber because they nail the things we care about most: clean airpath, terpene-friendly surfaces, and real temperature control.
No reviews yetBe the first to share your experience
Reviews
There are no reviews yet.
Be the first to review “Dr. Dabber Switch Go”Cancel Reply
Reviews
There are no reviews yet.