New Switch² Bundle Builder Ready for Launch! Switch² Build Your Own Bundle | Start Building Now! →
710 Sale is Here! $349 Switch 2. $320 Limelight Frolic. $264 SS WOHW. $400 Universal Baller and More! Switch² Build Your Own Bundle | Start Building Now! →
Coil Heat Stand By Crossing 2
Coil Heat Stand By Crossing 3
Coil Heat Stand By Crossing 2
Coil Heat Stand By Crossing 4
Coil Heat Stand By Crossing 5
Coil Heat Stand By Crossing 1
Coil Heat Stand By Crossing 2
Coil Heat Stand By Crossing 3
Coil Heat Stand By Crossing 2
Coil Heat Stand By Crossing 4
Coil Heat Stand By Crossing 5
Coil Heat Stand By Crossing 1

Coil Heat Stand by Crossing Technology

Original price was: $15.00.Current price is: $12.00.

In Stock. Ships Fast.
No reviews yet Be the first to share your experience
Write a review

Crossing Technology | Coil Heat Stand

A simple, sturdy home for a red-hot coil. This machined aluminum stand gives the heater from your wired ball vape a safe place to sit between pulls, so it is off your desk, off your hand, and out of the way. It is the same stand that ships in the Ruby Twist Pro kit, sold on its own as a replacement, a backup, or a spare for a second station.

Aluminum
Machined Build

Rubber Feet
Non-Slip Base

Round Coils
Universal Fit

Kit-Grade
Genuine Crossing

Machined Aluminum
Solid machined aluminum, not flimsy cast metal. It takes the heat of a working coil session after session and wipes clean when you are done. This is the exact stand Crossing includes in the Ruby Twist Pro kit.

Non-Slip Rubber Feet
Rubber feet on the base grip your table or tray so a glowing coil stays exactly where you set it. No sliding, no tipping, no wandering toward anything it should not touch.


Fits the Crossing heater coil in the Ruby Twist and Ruby Twist Pro, plus most standard round e-nail style coils. This is a resting stand, not a wrap-around coil guard.
Order within --:--:-- to ship today
Ships from Southwestern Michigan, typically 2 to 4 days to most of the US via UPS Ground.
Categories: , , , , , Tags: , , , , , , , Brand: ,
All Major Cards Accepted with a Guaranteed Safe Checkout

Crossing Technology | Ball Vape Accessory

Coil Heat Stand

A machined aluminum stand that gives a hot heater coil a safe place to land. Built for the Ruby Twist, Ruby Twist Pro, and other wired ball vapes. Rubber feet, solid build, no fuss. The same stand from the kit, on its own.

Aluminum
Machined Build

Rubber Feet
Non-Slip Base

Round Coils
Universal Fit

Ruby Twist
Ships In The Kit

What It Does

A Home For A Hot Coil

When you lift the heater off your ball vape, it is still glowing hot. The stand solves the small but real problem of where to put it down safely, every session.

01
Somewhere To Set The Heater
Pull the coil off your vape and it needs to go somewhere. The stand gives it a dedicated spot so it is not balanced on your desk, your tray, or the edge of something it will scorch. Set it down and reach for your glass.

02
Protects Your Surface
The aluminum body and rubber feet lift the coil and keep the heat off your table. Put the coil in its stand, keep working, and your bench stays scorch-free instead of collecting burn marks.

03
Keeps The Station Tidy
One consistent place for the coil means less fumbling mid-session. The stand sits put on the bench, so the hot coil always lands where you expect it to and never rolls off onto the floor.

The Build

Built Simple, Built Right

There is not much to a coil stand, and that is the point. What matters is that it holds up to heat and stays put. This one does both.

Material
Machined Aluminum
A solid aluminum body, machined rather than cast, so it holds up to repeated heat cycles and cleans up with a quick wipe. It is the same stand Crossing ships inside the Ruby Twist Pro kit, now available on its own.

Base
Non-Slip Rubber Feet
Rubber feet on the bottom grip the surface so the stand does not slide when you seat or lift a hot coil. That is stability right where you want it, directly under a heat source you are handling.

Fits Your Setup

Made For Wired Ball Vapes

Designed around the Crossing heater coil, with a footprint that reaches beyond it. If you run a wired ball vape and swap the coil on and off, this stand belongs on your bench.

Ruby Twist Coils
Made for the Crossing heater coil in the Ruby Twist and Ruby Twist Pro. Drop-in replacement or backup for the stand that came in your kit, so a lost or worn one is an easy fix.

Wired Ball Vapes
Built for wired setups where you take the heater on and off between sessions. If your coil spends part of the session off the vape and glowing, it needs a stand, and this is it.

Standard Round Coils
The universal footprint also cradles most standard round e-nail style coils, so it works well beyond just the Ruby Twist. One stand covers most wired heaters on the bench.

Know Before You Buy

Straight Talk On What It Is

It is a simple part, but a couple of details decide whether it is the piece you are actually looking for.

Heads Up
It Is A Stand, Not A Coil Wrap
This holds the coil, it does not wrap around it. If you want the guard that surrounds the coil to shield your hand and glass while it runs, that is the Stainless Steel Coil Guard Heat Shield, a separate part.

Heads Up
The Coil Still Gets Hot
Aluminum handles the heat, but the coil sitting on it is still hot. Move the coil by its handle or a tool, keep the stand clear of anything flammable, and let everything cool before you grab it bare-handed.

Heads Up
Wired Coils, Not Wireless
This is sized for wired heater coils you take on and off during a session. It is a resting stand, not a wireless dock or a charging base, and it does not power or hold a wireless coil unit.

Heads Up
Coil And Handle Sold Separately
You get the stand. The heater coil and any wood handle are their own items. Grab them together if you are building out or refreshing a station.

In The Box

What You Get

Pairs Well With

Gear That Goes With It

The stand is at home next to the rest of a wired ball vape setup. Here is what regulars pair it with.

Crossing Technology | Veteran-Owned | Real Support
Give Your Hot Coil A Home

The stand is above on this page. Machined aluminum, rubber feet, and the exact part Crossing puts in the Ruby Twist Pro kit. Cheap insurance against a scorched bench and a coil rolling off the table. Questions on fit? Hit our chat, email us, or drop into Discord.

Add To Cart
Shop The Ruby Twist Pro
Join Our Discord

Veteran-Owned and Operated. Includes one Coil Heat Stand. A small part that saves your table and keeps a hot coil where it belongs.

No reviews yet Be the first to share your experience

Reviews

There are no reviews yet.

Be the first to review “Coil Heat Stand by Crossing Technology”

Your email address will not be published. Required fields are marked *

Drag photos here or click to upload

Related products