3D XL Heater Replacements for Pocket Rocket and v5
3D XL Heater Replacements for Pocket Rocket and v5
3D XL Heater Replacements for Pocket Rocket and v5
3D XL Heater Replacements for Pocket Rocket and v5
3D XL Heater Replacements for Pocket Rocket and v5
3D XL Heater Replacements for Pocket Rocket and v5
3D XL Heater Replacements for Pocket Rocket and v5
3D XL Heater Replacements for Pocket Rocket and v5
3D XL Heater Replacements for Pocket Rocket and v5
3D XL Heater Replacements for Pocket Rocket and v5

3D XL Ceramic Heater Replacement

(3 customer reviews)

Price range: $15.00 through $33.00

In Stock. Ships Fast.
5.0 / 5
3 reviews
Read reviews

Crossing Technology | Replacement Heater

The 3D XL Ceramic Heater is the drop-in replacement cup for the Pocket Rocket, TUG XL, Lunar Lander, and more. The heating element runs through the base and up the walls, so the whole surface heats evenly for full, clean vaporization. When your cup is worn, you swap the heater, not the entire atomizer.

3D Heat
Base + Walls

14.5mm
Cup ID

3-6 mo
Typical Life

1 / 2 / 3
Pack Options

Heats From Every Angle
The internal element wraps the base and the sidewalls, not just the bottom. That fully diffused surface means even heat, no cold spots, and clean vapor across the whole load, even when you pack it out.

Swap the Cup, Not the Rig
When flavor drops off, replace just the heater for a fraction of a new atomizer. The slick glazed interior wipes clean with a qtip, and priced to keep on hand so you never dab on a tired cup.

The seam down one side of the heater is normal and comes from the manufacturing process. It does not affect performance.

Ships Monday
Ships from Southwestern Michigan, typically 2 to 4 days to most of the US via UPS Ground.
SKU: N/A Categories: , , , Tags: , , , , , , , , , , , , , , , , , , , Brand: ,
All Major Cards Accepted with a Guaranteed Safe Checkout

Crossing Technology | Replacement Heater

3D XL Ceramic Heater

The full-surface replacement cup for the Pocket Rocket, TUG XL, and Lunar Lander. Heats through the base and the walls for even, clean vaporization. When the cup wears out, you swap the heater, not the whole atomizer.

3D Heat
Base + Walls

15.2 x 15.5
mm Tall x Dia

14.5mm
Cup ID

3-6 Mo
Typical Life

1 / 2 / 3
Pack Options

How It Heats

Full-Surface 3D Ceramic

Most replacement cups only heat from the bottom. This one runs the element through the base and up the sidewalls, so heat reaches the whole load at once. That is what gives it clean flavor and consistent vapor, even on bigger dabs.

3D Heating Element
The internal element is molded through the base and inside the walls of the ceramic. The whole cup becomes the heating surface, not just a hot plate at the bottom, so your concentrate vaporizes from every side.

Fully Diffused Surface
Even heat means no cold spots and no scorching. The XL cup handles big loads without spillover, which is exactly what owners call out most. Load it up, let it work, and get a full, even pull every time.

Slick Glazed Finish
The interior carries a smooth glazed coating that wipes clean with a qtip. Leave a slight oily residue at the end of a session to help maintenance and extend the life of the cup. Easy upkeep, less waste.

Dial It In

Recommended Settings

These heaters run best with temperature control. Here is where we run ours and the ranges we recommend. Dial in from here to match your device and your concentrate.

Our Daily Driver
TCR 200 @ 75W
Fast heat-up of around 8 to 9 seconds. This is what we run for a quick, punchy session. It is legit.

Recommended Range
TCR 150-220 / 60-70W
Vaping range of 380 to 520F, temperature as desired. Stay in this window with proper settings and equipment for the best flavor and life.

Burn-Off Clean
42W Auto-Fire
Run on auto-fire until clean, two minutes or longer. Do not go over .80 live resistance or you risk cracking the cup. Use burn-offs sparingly.

See It Run

Fit and Build

Exact Dimensions

Measure twice, order once. Here is the size and what shows up when you buy.

Heater Size
15.2 x 15.5 mm
Approximately 15.2mm tall by 15.5mm in diameter, with a 14.5mm inner diameter on the cup. Big enough for real loads, sized to drop straight into the atomizers it fits.

What You Get
Full Ceramic XL Heater
One genuine full-ceramic XL heater per unit, available individually or in packs of two or three so you always have a fresh cup on the shelf. Choose your quantity above.

Lifespan and Care

Make It Last

Treated well, these go a long way for a low-cost part. Treated hard, they wear faster. Here is the honest picture.

Typical Life
3 to 6 Months
With temp control and gentle cleaning, most users get three to six months of daily use. With good habits and a solid feel for the tech, it is not unheard of for one to last over a year.

Gentle Cleaning
Qtip After Sessions
Wipe the glazed interior with a qtip while warm and leave a slight oily film at the end of a session. That light residue helps maintenance and keeps the surface conditioned between dabs.

Burn-Off Tradeoff
Use Sparingly
Burn-off cycles clean deep but the heat stress adds up. Lean on them often and life can drop to one or two months. We priced these low so you never have to push a cup past its prime.

Compatibility

What It Fits

The 3D XL Ceramic Heater drops into the Crossing and Core-series atomizers below. If your device is on this list, this is your replacement cup.

Honest Notes

Know Before You Buy

Heads Up
The Side Seam Is Normal
There is a seam running down one side of the heater on the outside. That comes from the manufacturing process and is nothing to worry about. It does not affect heating or performance.

Heads Up
Temp Control Gets the Best Out of It
These are built to run with proper temperature control settings and equipment. Running them on a raw wattage box without the recommended settings will hurt flavor and shorten life. Dial in the ranges above.

Heads Up
Frequent Burn-Offs Wear It Faster
Burn-off cycles are handy for a deep clean, but repeated high-heat cycles stress the ceramic. Rely on them daily and you may see one to two months instead of three to six. Qtip cleaning is the gentler default.

Complete Contents

What’s in the Box

Select your pack size above the Add to Cart button. Device shown in photos is not included, this listing is the replacement heater only.

Resources

Keep It Dialed In

Crossing Tech | Veteran-Owned | Real Support
Keep a Fresh Cup on Hand

A worn heater is the fastest way to kill flavor. Grab a single to swap now, or a three pack so you are never caught dabbing on a tired cup. Not sure it fits your rig? Ask us before you buy.

Join Our Discord Contact Us
Veteran-Owned and Operated. The Dab Hut keeps these priced low and in stock because a good cup is worth swapping often. We run them ourselves.

Quantity

One, Two, Three
5.0 / 5
3 reviews

3 reviews for 3D XL Ceramic Heater Replacement

  1. J.T. (verified owner) –

    Verified Buyer

    XL heater is goated!! Handles big loads with no spill over!

  2. &. (verified owner) –

    Verified Buyer

    Large capacity, heats quickly!

  3. W. (verified owner) –

    Verified Buyer

    Love being able to replace my cup without having to buy a whole new atomizer. Thank you Dabhut and thank you, Chuck!

Add a review

Your email address will not be published. Required fields are marked *

Drag photos here or click to upload

Related products

Trending Now

3mm through 8mm Black Grade D Moissanite Terp Pearls White Background
Terp Pearls Price range: $1.00 through $14.99
Wireless One-Hit Wonder White Background studio lighting
Wireless One-Hit Wonder Ball Vape (WOHW) Price range: $80.00 through $480.00
22mm Glass Diffuser Bowl for SS WOHW
22mm Glass Diffuser Bowls Design by Terp Chaser’s Club$20.00
3D XL Heater Replacements for Pocket Rocket and v5
3D XL Ceramic Heater Replacement Price range: $15.00 through $33.00
We ship to the United States only. No international orders, including Canada, the UK, and the EU. Shipping policy