New Switch² Bundle Builder Ready for Launch! Switch² Build Your Own Bundle | Start Building Now! →
710 Sale is Here! $349 Switch 2. $320 Limelight Frolic. $264 SS WOHW. $400 Universal Baller and More! Switch² Build Your Own Bundle | Start Building Now! →

14 Wrap 36mm Axial Flex Cobra Enail Coil

Original price was: $70.00.Current price is: $50.00.

In Stock. Ships Fast.
New for Globbers!
No reviews yet Be the first to share your experience
Write a review

The Dab Hut | 36mm Axial Flex Cobra Enail Coil

A big enail coil built for big glass. The 14 wrap axial design wraps heat around a 36mm banger or slurper and covers up to 46mm of depth, so tall tower dishes and deep slurpers come up to temp evenly from top to bottom. The flexible Cobra arm lets you set it exactly where you want it. Made for heavy dabbers running large quartz on a compatible enail PID.

36mm ID
Inner Diameter

14 Wrap
Axial Coil

150w
Heating Power

46mm
Depth Coverage

Deep, Even Heat
Fourteen axial wraps put heat around the full wall of the dish and down through 46mm of depth. Big slurpers and tower bangers heat evenly instead of scorching the top while the bottom lags behind.

Flexible Cobra Arm
A 15 inch flexible arm bends and holds its shape, so you route the coil and set the dish at the angle that suits your rig. No fighting a stiff lead to get the banger seated right.


110v only. It runs off any enail PID with a matching pin layout, including Crossing, DC, Auber, and CH. See the compatibility chart in the full description below.
Order within --:--:-- to ship today
Ships from Southwestern Michigan, typically 2 to 4 days to most of the US via UPS Ground.

In stock

Categories: , , , , Tags: , , , , , , , , Brand: ,
All Major Cards Accepted with a Guaranteed Safe Checkout

The Dab Hut | Enail Coil

14 Wrap 36mm Axial Flex Cobra Coil

A large-format enail coil for heavy dabbers running big bangers and slurpers. Fourteen axial wraps, 36mm inner diameter, 150w of power, and a flexible Cobra arm. Built to heat large quartz evenly on a compatible enail PID.

36mm ID
Inner Diameter

42-43mm
Outer Diameter

14 Wrap
Axial Coil

150w
Heating Power

Built For Big Glass

Heat That Reaches The Bottom

Large quartz needs a coil that can heat all of it. The axial wrap and the depth coverage are what let this coil bring a big dish up to temperature evenly.

01
Fits 36mm Bangers and Slurpers
A 36mm inner diameter and 42 to 43mm outer diameter wrap a 36mm banger, slurper, or tower dish, or anything smaller. If you run large quartz that a standard 30mm coil cannot fully surround, this is the size made for it.

02
Covers Up To 46mm Of Depth
The coil reaches 46mm deep, so tall slurpers and tower dishes get heat down the full wall, not just at the rim. The whole pour zone comes up to temperature together, which is the difference between an even dab and a scorched top.

03
14 Wrap Axial Design
Fourteen wraps in an axial layout put more heating element in contact with the glass than a low-wrap coil. More wraps means more even coverage around the dish and steadier heat retention through the dab.

The Cobra Arm

Bend It Where You Want

A coil is only as good as how it sits on your glass. The Cobra arm and the 150w rating handle the placement and the power.

Placement
15 Inch Flexible Arm
The 15 inch (38cm) flexible arm bends and holds its shape, so you position the dish at the height and angle your rig needs and it stays put. No wrestling a stiff lead, no awkward cord routing across the table.

Power
150w For Large Quartz
150 watts is the power to drive a 36mm coil and a big dish without lagging. Paired with a compatible PID, you get the steady, set-and-hold temperature control that makes a large slurper consistent dab after dab.

Compatibility

Works With Your PID

This coil is the heating element, so it runs off an enail PID controller on 110v power. What matters is the pin layout, not the brand. It uses the connector shown on the right in the chart below, which works with Crossing, DC, Auber, CH, and other PIDs that share it. It runs great on a Crossing PID, but it is not limited to one.

Enail PID pin layout compatibility chart. This coil uses the connector layout on the right, compatible with Crossing, DC, Auber, and CH style PID controllers.
This coil uses the pin layout on the right. Match it to your controller. It works with Crossing, DC, Auber, CH, and other PIDs that share that connector. If yours is not pictured, check the pins or ask us first.

Know Before You Buy

Straight Talk On Fit And Power

An enail coil is a serious piece of gear. A few details decide whether it is right for your setup.

Heads Up
Needs A Compatible PID
This is the coil only. It is not a standalone device and needs an enail PID with a matching pin layout to run. It works with Crossing, DC, Auber, CH, and other controllers that share its connector, shown in the chart above. If you need one, we carry the Crossing Dual PID.

Heads Up
110v Only
This coil is built for 110v power, the standard in the US. It is not a 220v coil. Run it on the right voltage with a matching PID setup, not on an international supply.

Heads Up
Sized For 36mm Or Smaller
The 36mm inner diameter fits a 36mm banger or slurper and anything smaller. It will not fit quartz larger than 36mm. Measure your dish before ordering if you are not sure of its outer diameter.

Heads Up
It Gets Very Hot
An enail coil reaches dabbing temperatures and stays there. Treat it with the same care as any heated element: keep it clear of anything flammable, do not handle the hot coil, and let it cool fully before moving it.

In The Box

What You Get

The Dab Hut | Veteran-Owned | Real Support
Heat Your Big Quartz Right

The coil is above on this page. A 36mm, 14 wrap, 150w Cobra coil for large bangers and slurpers, ready to run on the PID you already own. Questions on fit, depth, or PID compatibility? Hit our chat, email us, or drop into Discord.

Add To Cart
Shop The Crossing PID
Join Our Discord

Veteran-Owned and Operated. Includes one 14 wrap 36mm Axial Flex Cobra coil. The big-glass coil we reach for when a 30mm cannot cover the dish.

No reviews yet Be the first to share your experience

Reviews

There are no reviews yet.

Be the first to review “14 Wrap 36mm Axial Flex Cobra Enail Coil”

Your email address will not be published. Required fields are marked *

Drag photos here or click to upload

Related products