B2C Vape | 30mm E-Nail Coil
30mm Deep Axial E-Nail Coil
Built for Universal Baller owners who want more surface area and lower operating temps.
30mm
Diameter
Deep Axial
Coil Style
150W
Output
5-Pin XLR
Connection
Kevlar
Sheath
Why Step Up to 30mm
What This Coil Does Differently
The 30mm deep axial coil covers more surface area than a standard 25mm coil. That means more even heat distribution, better contact with larger adapters, and the ability to run at lower temperatures without losing extraction quality.
01
FMJ Adapter Pairing
The Terp Chasers Club 30mm FMJ adapter turns the Universal Baller into a 30mm ball vape for maximum extraction and heat retention. This coil gives the FMJ a flat, even heating surface across its full base. Users running the FMJ adapter have reported dropping their PID temps while maintaining or improving extraction.
02
Even Surface Coverage
The deep axial design wraps the bottom and sides of whatever sits inside it. That full-contact approach means fewer hot spots and more consistent heating across the entire working area. For the Universal Baller with the FMJ, that translates to better heat transfer into the ball chamber.
03
Concentrate Flexibility
This coil is not just for ball vapes. It works with 30mm bangers, slurpers, and upcoming Dab Hut auto spinner kits. If you are building a station around the Dual PID or just want one coil that covers multiple use cases, the 30mm opens up your options.
Construction
Built to Last
Same build standards as the 25mm coils already trusted in the Dab Hut ecosystem, scaled up to 30mm.
Kevlar Braided Sheath
The wiring is protected by a durable Kevlar braided sheath. It handles the heat, resists abrasion, and keeps the internal wiring safe during daily use and repositioning.
150 Watt Output
150 watts across a 30mm surface. Enough power to heat the full working area evenly without the overshoot issues that come from undersized coils trying to compensate for a larger diameter.
Crossing PID Wiring
Standard 5-pin XLR connection wired for Crossing style PIDs. Plug directly into the Crossing Classic PID, Crossing Classic Dual PID, or any PID using the same pinout. No adapters needed.
Dock Compatibility
Where It Fits
This coil fits two docks in the Dab Hut lineup. It will not fit the Crossing Wireless Dock Station due to the larger 30mm diameter.
|
Compatible
Simple Machined Aluminum Dock
|
Compatible
Bigger Wireless Dock Station
|
Not Compatible
Crossing Wireless Dock Station
|
Coming Soon
Upcoming Pairings
The Dab Hut is developing 30mm auto spinners and slurper setups that pair directly with this coil. If you are building a station with concentrate versatility in mind, this coil gives you a head start on that expansion. Watch our Discord and this listing for updates as those products go live.
Honest Notes
Know Before You Buy
Heads Up
Not for the Crossing Wireless Dock
The 30mm diameter is too large for the Crossing Wireless Dock Station. This coil only fits the Simple Machined Aluminum Dock and the Bigger Wireless Dock Station. If you own the Crossing dock, this is not the right coil.
Heads Up
Crossing PID Pinout Only
This coil is wired for Crossing style PIDs. If you are using a PID from another manufacturer, verify the 5-pin XLR wiring matches before connecting. Mismatched wiring can damage your coil and your controller.
Heads Up
FMJ Adapter Sold Separately
The Terp Chasers Club FMJ adapter is not included. It is available directly from Terp Chasers Club. This coil works on its own with any compatible 30mm setup, but the FMJ pairing is a specific use case that requires both pieces.
Heads Up
GFCI Sensitivity
Like all e-nail coils, this may trip GFCI breakers in some homes. If you experience trips, try a different outlet or a non-GFCI circuit. This is not a product defect.
Included
What’s In the Box
|
+
30mm Deep Axial E-Nail Coil × 1 |
+
Kevlar Braided Sheath |
|
+
5-Pin XLR Connection (Crossing Wiring) |
+
150W Output |
Common Questions
Frequently Asked
Will this fit my Crossing Wireless Dock Station?
No. The 30mm coil is too large for the Crossing Wireless Dock Station. It only fits the Simple Machined Aluminum Dock and the Bigger Wireless Dock Station.
Do I need the FMJ adapter to use this coil?
No. The FMJ adapter is one use case for this coil, specifically for Universal Baller owners. This coil also works with any 30mm banger, slurper, or compatible 30mm setup on its own.
Will this work with my Crossing Classic PID?
Yes. This coil is wired for Crossing style PIDs using the standard 5-pin XLR pinout. It plugs directly into the Crossing Classic PID, Crossing Classic Dual PID, or any controller using the same wiring configuration.
What about the upcoming Dab Hut auto spinners?
We are developing 30mm auto spinner and slurper setups that pair directly with this coil. If you pick this coil up now, you will be ready for those products when they launch. Follow our Discord for updates.
How does this compare to the 25mm coils?
The 30mm deep axial covers more surface area than the 25mm coils. It is designed for setups that benefit from a larger heating footprint, like the FMJ adapter or 30mm bangers. The 25mm coils are still the right choice for the SS WOHW and other 25mm setups.
Resources
Veteran-Owned and Operated. Built by The Dab Hut for the community that keeps us going.
Need Help?
|
Dab Hut Discord Community tips, live support |
Contact Us Email or on-site chat. We respond same day. |
25mm Coils Need a 25mm for your WOHW or other setup? |
B2C Vape | Veteran-Owned | Real Support
Ready to Go 30mm?
Your coil is right above. If you have questions about dock compatibility, the FMJ pairing, or which coil fits your setup, reach out. We answer every message.
Veteran-Owned and Operated. Built by The Dab Hut for the community that keeps us going.
Reviews
There are no reviews yet.